AutoCAD Software : Learn commands step by step

Hello, Friends Today We learn TXT2MTXT Command in AutoCAD. We can convert one or more Single line Text objects into Multiline Text (Mtext) Object. COMMAND : TXT2MTXT MENU : EXPRESS > TEXT > CONVERT TEXT TO MTEXT Settings > Combine into a single mtext object Combine Selected single line text objects into single mtext objects. Text ordering - Sort top-down Specifies the order of the selected text by descending vertical position. Text ordering - Select order of text Specifies the order of the selected text by manual selection by Mouseclick. Word-wrap text  Combines all the lines of text into a single line, and then wraps any text that exceeds the width of the mtext object to the next line. Force uniform line spacing Applies consistent interline spacing and paragraph spacing when word wrap is turned on. Paragraph spacing is Half larger than interline spacing. TXT2MTXT COMMAND YouTube Video Link: I hope You Like this Post. Subscribe to this blog so you can get regular updates about

Hello, Friends Learn Torient and Tjust Command in AutoCAD Drawing. Command : Torient Short-cut : Tori Menu : Express > Text > Rotate Text - Rotate Selected Text using Absolute Angle or by Two mouse click Points. We can also Rotate Text using most readable option. Options New absolute rotation     :  Enter a new absolute orientation angle for all selected text. We can also rotate text using two mouse click points direction.  Most Readable         : Orients selected text objects to the most readable right-side-up, right-read orientation. Command :  Tjust Short-cut :  Tj Menu :  Express > Text > Justify Text - Change the Justification of Selected Text without moving Text. Torient Command  & Tjust Command Video Link : I hope You Like this Post. Subscribe to this blog so you can get regular updates about this blog! If you have any doubt you can comment, we will reply to you as soon as possible. you can share this post with your friends, relative & Colleagues. In t

 Hello, Today We Learn How to use Tcircle Command in AutoCAD Drawing. We can draw Circle, Slot and Rectangle frame around Selected Text in AutoCAD Drawing. Command :  Tcircle Short-cut :  TCI Menu :  Express > Text > Enclose Text with Object. Enclose Selected Dtext or Mtext Objects using Circle, Slot or Rectangle Object. Circle 's diameter , Size of Rectangle and Slot can be Constant or Variable. Variable Size of Circle, Rectangle or Slot is to be adjusted as per given offset value.  The Constant option encloses selected text and mtext objects with objects that are all the same size, the size of the largest enclosing object. Circle :      Creates circles of constant or variable diameter. Slot:      Creates slots of constant or variable size. A slot is a rectangle with convex sides. For                                         constant-   size slots, you can specify the dimensions that are held constant: width, height,                               or both width and height.

Hello, Friends Today We learn Textmask Command in AutoCAD. Command : Textmask Menu : Express > Text > Text Mask - Create a mask ( Blanked Space ) behind Selected Text or Mtext Objects. Options Wipeout: Creates a wipeout object with a rectangular frame displayed in the graphics background color. 3dface: Creates a 3D face object. Solid: Creates a 2D solid object in a specified color. Wipeout Masking is done with Blanked Rectangle Area. Masking does not plot properly if the Hide Lines option is used while plotting. One advantage of using a Wipeout mask is that what you see on screen is what you get on your plot. 3Dface The 3Dface created by TEXTMASK has all of its edges set to invisible. This option is useful if you do not have a raster-capable plotter. The Hide Lines option must be used while plotting for the mask effect to work. With this option, masked text does not look masked on screen. Solid With Solid option, masked text appears masked in the drawing area. Also, masks c

Hello Friends, Today We learn Tcount Command in AutoCAD. Command : Tcount Menu : Express > Text > Automatic Text Numbering - Add Sequential Numbering to Selected Text or Mtext as Prefix, Suffix or Replacement Text.   Select Objects : Select text or Mtext Objects X :    Determines numeric order by increasing x-coordinate values of the selected text. Y :  Determines numeric order by decreasing the y-coordinate value of the selected text. Select-order : Determines numeric order according to the order in which the text was selected. Enter count [Start, increment] <current>: Enter the starting number and increment, separated by a comma, or press Enter Start           Specifies the first number in the sequence. Increment Specifies the difference between the numbers in the sequence. Note : We can also add negative value as increment value. Add minus (-) sign before value. Overwrite              Replaces selected text strings with numbers Prefix              Adds the number

Hello, Friends Today We learn Change Command in AutoCAD Drawing. Command : Change - Change the Properties of Selected Objects in AutoCAD Drawing. Change Point or Value Change the properties of selected object. It Depends upon Type of object that you select. Line : Change the endpoint of Selected line. Location of endpoint is depend upon Ortho On/Off. Circle : Change the radius of Selected Circle. Text : Change the location of Selected Text. Properties(P) Change the Properties of Selected Object Like Color, Linetype, LineWeight, Linetype Scale, Layer, Elevation, Thickness, Annotative, Material and Transparency.     Color(c) : Change the Color Property of Selected Object. Change Color using True Color          (RGB Value) or by ColorBook.     LType(lt) : Change the linetype of Selected Object. e.g. Dashed, Center     ltScale(s) : Change the linetype scale of Selected Object.     LWeight(lw) : Change the lineweight of Selected Object.     LAyer(la) : Change the layer of Selected Object.

Hello, Friends Today We learn Purge Command in AutoCAD. Purge Command is used to remove unused & unreferenced items like Layers, Blocks, Dimension Style, Text Style, Linetypes etc... in AutoCAD Drawing. We can used Purge Command to clean up AutoCAD Drawing to remove unused items. Removing unused items can reduce file size and also reduces clutter. Command : Purge Short-cut : Pu Menu : File > Drawing Utilities > Purge There are two options in Purge Dialog Box. - Purgeable Items - Find Non-Purgeable Items Purgeable Items  List the items that we can purge from list in current AutoCAD Drawing. Preview Click on item in list to see preview of Item. Confirm Each item to be purged Display Confirm Dialog Box when we purge item. Purge Nested Items Removes all unused named objects from the drawing even if they are contained within or referenced by other unused named objects. Purge Unnamed Objects           Zero-length geometry           Deletes geometry of zero length, including lines,