Create & Modify Dimension Style - 4

-
 
Hello, Friends
Today We learn Fit and Tolerance options in Dimension Style.


Fit Options: 
If there isn't enough space to place both arrow and text inside extension lines, we can select which thing to move outside the extension lines.
- Either text or Arrows (best fit)
- Arrows
- Text
- Both text and arrows
- Always keep text between extension lines
- Suppress arrows if they don't fit inside extension lines

Text Placement:
- Beside the dimension line
- Over dimension line, with leader
- Over dimension line, without leader

Scale for dimension features:
Scale all Dimension features like Arrow Size, Text Size, Extend beyond dimension line,
Offset from origin, Offset from Dimension text etc..
- Use Overall scale of ( type Scale factor value)
- Annotative ( Change Annotation Scale Value 1:1,1:2,1:4,1:10 etc.)

Fine Tuning:
- Place Text Manually ( Place Dimension Text Manually)
- Draw Dimension lines between Extension lines




Tolerance Format:
- Method ( None, Symmetrical, Deviation, Limits, Basic)
- Precision (0 to 0.00000000 up to eight digits)
- Upper Value ( Specify Tolerance Value , For Deviation Method Upper value is positive)
- Lower Value ( Specify Negative Lower Value, Don't write "-" sign before value)
- Scaling for Height (Scale Tolerance Value as per Scale Factor Value)

Vertical Position:
Specify Dimension Text Value in Middle ,Top or Bottom Side of Tolerance Value.

Tolerance Alignment:
Align Tolerance Values as per Decimal Separators (.) or as per Operational Symbols (+,-).

Zero Suppression:
Leading : Remove unused Zero at the Starting of Tolerance Value.
Trailing : Remove unused Zero at Ending of Tolerance Value.
0 feet : Remove unused 0 feet from Tolerance Value.
0 inches : Remove unused 0 inches from Tolerance Value.

Alternate Unit Tolerance:
(Only apply if Alternate Unit is ON)
Change the Precision value from 0 to eight digit after decimal point.
        Zero Suppression : Remove unused zeros from Starting using Leading and Remove unused Zeros at ending using Trailing option. Remove unused 0 feet and 0 inches from Alternate Tolerance Value.


I hope You Like this Post. Subscribe to this blog so you can get regular updates about this blog! If you have any doubt you can comment, we will reply to you as soon as possible. you can share this post with your friends, relative & Colleagues.

In the next post, we will learn New AutoCAD Command / Topic.
- Bhargav Joshi



Location: Vadodara, Gujarat, India

Comments

Post a Comment

More Information Contact US on email.

Popular posts from this blog

How to Use Mirrtext Command in AutoCAD Software?

-
Image
  Hello, Friends Today We learn about Mirrtext Command in AutoCAD Software. COMMAND : MIRRTEXT By This Command, We can control Whether the text will mirrored or not. Value                                   Description      0                    Retain Text, Text orientation will not change.     1                    Mirror the Text, Text orientation will change. MIRRTEXT VALUE =0 MIRRTEXT VALUE=1 After Change Value in Mirrtext Command, We have to Mirror text again. By Default, Mirrtext value is 0. See Mirrtext YouTube Video:   I hope You Like this Post. Subscribe this blog so you can get regular updates about this blog! If you have any doubt you can comment, we will reply to you as soon as possible. You can share this post with your friends, relative & Colleagues. In the next post, we will learn New AutoCAD Command / Topic. - Bhargav Joshi
Read more

How to write Mtext in AutoCAD Software?

-
Image
  Hello, Friends Today We will learn Multiline Text(MText) In AutoCAD Software. COMMAND : Mtext Short-cut : MT Menu : Draw > Text > Multiline Text By Mtext Command, We can write Paragraph Text or Multilines in AutoCAD.There are many advantages in Mtext like Formatting Tools, Paragraph, Symbols, Columns. Type "Mtext" Command, then Specify First and opposite corner on screen by Mouseclick. Write Text inside Mtext Window. We can change Text Style, Text Font, Text Height & Annotation option from Formatting Tools.We can Apply Bold & Italic Effect on True type Fonts.We can also Apply Underline & Overline to Selected Text. Oblique Angle : Write Slant Text using Oblique Angle. Angle should be between -85 to +85. Tracking : Adjust the spacing between Text Characters. Min.0.75 & Max.4.0 Value. Width Factor : Narrow or Widen Selected Text. Min.0.1 & Max.10.0 Stack: We can add horizonal line, diagonal line, Tolerance value using Slash (/), Pound(#) & Carat
Read more

Convert Singleline Text into Multiline Text using TXT2MTXT Command in AutoCAD.

-
Image
Hello, Friends Today We learn TXT2MTXT Command in AutoCAD. We can convert one or more Single line Text objects into Multiline Text (Mtext) Object. COMMAND : TXT2MTXT MENU : EXPRESS > TEXT > CONVERT TEXT TO MTEXT Settings > Combine into a single mtext object Combine Selected single line text objects into single mtext objects. Text ordering - Sort top-down Specifies the order of the selected text by descending vertical position. Text ordering - Select order of text Specifies the order of the selected text by manual selection by Mouseclick. Word-wrap text  Combines all the lines of text into a single line, and then wraps any text that exceeds the width of the mtext object to the next line. Force uniform line spacing Applies consistent interline spacing and paragraph spacing when word wrap is turned on. Paragraph spacing is Half larger than interline spacing. TXT2MTXT COMMAND YouTube Video Link: I hope You Like this Post. Subscribe to this blog so you can get regular updates about
Read more