How to create polyline or region object from Boundary Command in AutoCAD Software?

-

 

Hello, Friends
Today We will learn about Boundary Command in AutoCAD Software.

Command: Boundary
Short-cut: Bo
Menu: Draw > Boundary

- By Boundary Command, We can create Region or Polyline Object from Closed Bounded ( Enclosed) Objects.


Pick Points: By this Option, A boundary is determined from existing objects that form an enclosed area around a specific point.

Island Detection: By this option, We can controls whether internal boundaries ( Island) are detected or not. If We Check this option, then All internal boundaries create regions or polylines objects.

Object Type: Controls New Boundary create a Region object or Polyline object.

Boundary Set: Selected objects are form a Boundary set while analysing boundary.
        Current Viewport: Create a New Boundary set in Current Viewport.
        New : We can selecte objects which define new Boundary Set.Boundary includes only thosed objects which create a region or polyline object when construct a new boundary set.



Boundary Command YouTube video:  https://youtu.be/DKq62oRjSt4

I hope You Like this Post. Subscribe this blog so you can get regular updates about this blog! If you have any doubt you can comment, we will reply to you as soon as possible.you can share this post with your friends, relative & Colleagues.

In the next post, we will continue to about AutoCAD Commands.
- Bhargav Joshi



Location: Vadodara, Gujarat, India

Comments

Post a Comment

More Information Contact US on email.

Popular posts from this blog

How to use purge Command in AutoCAD Drawing?

-
Image
Hello, Friends Today We learn Purge Command in AutoCAD. Purge Command is used to remove unused & unreferenced items like Layers, Blocks, Dimension Style, Text Style, Linetypes etc... in AutoCAD Drawing. We can used Purge Command to clean up AutoCAD Drawing to remove unused items. Removing unused items can reduce file size and also reduces clutter. Command : Purge Short-cut : Pu Menu : File > Drawing Utilities > Purge There are two options in Purge Dialog Box. - Purgeable Items - Find Non-Purgeable Items Purgeable Items  List the items that we can purge from list in current AutoCAD Drawing. Preview Click on item in list to see preview of Item. Confirm Each item to be purged Display Confirm Dialog Box when we purge item. Purge Nested Items Removes all unused named objects from the drawing even if they are contained within or referenced by other unused named objects. Purge Unnamed Objects           Zero-length geometry           Deletes geometry of zero length, including lines,
Read more

Convert Singleline Text into Multiline Text using TXT2MTXT Command in AutoCAD.

-
Image
Hello, Friends Today We learn TXT2MTXT Command in AutoCAD. We can convert one or more Single line Text objects into Multiline Text (Mtext) Object. COMMAND : TXT2MTXT MENU : EXPRESS > TEXT > CONVERT TEXT TO MTEXT Settings > Combine into a single mtext object Combine Selected single line text objects into single mtext objects. Text ordering - Sort top-down Specifies the order of the selected text by descending vertical position. Text ordering - Select order of text Specifies the order of the selected text by manual selection by Mouseclick. Word-wrap text  Combines all the lines of text into a single line, and then wraps any text that exceeds the width of the mtext object to the next line. Force uniform line spacing Applies consistent interline spacing and paragraph spacing when word wrap is turned on. Paragraph spacing is Half larger than interline spacing. TXT2MTXT COMMAND YouTube Video Link: I hope You Like this Post. Subscribe to this blog so you can get regular updates about
Read more

How to Use Mirrtext Command in AutoCAD Software?

-
Image
  Hello, Friends Today We learn about Mirrtext Command in AutoCAD Software. COMMAND : MIRRTEXT By This Command, We can control Whether the text will mirrored or not. Value                                   Description      0                    Retain Text, Text orientation will not change.     1                    Mirror the Text, Text orientation will change. MIRRTEXT VALUE =0 MIRRTEXT VALUE=1 After Change Value in Mirrtext Command, We have to Mirror text again. By Default, Mirrtext value is 0. See Mirrtext YouTube Video:   I hope You Like this Post. Subscribe this blog so you can get regular updates about this blog! If you have any doubt you can comment, we will reply to you as soon as possible. You can share this post with your friends, relative & Colleagues. In the next post, we will learn New AutoCAD Command / Topic. - Bhargav Joshi
Read more